WhatsApp: +86 18020776782
Time: 24/7/365 Support
Hot Categories
Woodward 9907-029 Generator Synchronizer
Price：Request a Quote
Warranty：1 year
Condition：Brand new and factory sealed
Inquire Email：sales1@apterpower.com
Mobile/WhatsApp：+8618020776782
Click To Get Datasheet：
（click）
Detail
- Product NameWoodward 9907-029 Generator Synchronizer
- Item NO.9907-029
- Weight2.2000 kg = 4.8502 lb = 77.6027 oz
- CategoryOTHER
- BrandOTHER
- Creation Time2026-10-28
- Woodward 9907-029: Speed and phase synchronization for generator paralleling, with 1% voltage matching.
9907-029
Speed and phase synchronization for generator paralleling, with 1% voltage matching.
Contact info
Specifications
| Bus and generator voltage inputs | 115 or 230 VAC RMS |
| Input frequency | 50/60 Hz |
| Input voltage tolerance | ±10% |
| Power consumption | 5 W maximum |
| Phase-match window | ±10° |
| Voltage-matching configuration | 1% voltage matching |
| Resistive DC contact rating | 10 A at 28 VDC |
| Resistive AC contact rating | 3 A at 120 VAC, 50/60 Hz |
| Inductive DC contact rating | 6 A at 28 VDC |
| Inductive AC contact rating | 2 A at 120 VAC, 50/60 Hz |
| Breaker-close command duration | Approximately 1 second |
| Selectable match-up time | 1/8, 1/4, 1/2 or 1 second |
| Factory match-up time | 1/2 second |
| Operating temperature | -45 to +70 °C |
| Optimal operating temperature | +10 to +30 °C |
| Operating mode selections | RUN, CHECK, PERMISSIVE and OFF |
| Reset behavior | Automatic reset |
| Breaker-close contact | Normally open |
| High-impedance control interface | Woodward 2301 load-sharing controls |
| Low-impedance control interface | 2301A, EPG and 2500 load-sharing controls |
| Direct EPG control interface | EPG controls without load sharing |
| UL listing file | E97763; agency marking on unit required |
| Minimum signal-wire cross-section | 0.5 mm² (20 AWG), stranded twisted shielded wire |
| Generator PT phase terminal | Terminal 2 |
| Generator PT neutral terminal | Terminal 5 |
| Bus PT phase terminal | Terminal 6 |
| Bus PT neutral terminal | Terminal 9 |
| High-impedance output terminals | 20 (signal) and 21 (common) |
| Low-impedance output terminals | 22 (signal) and 21 (common) |
| EPG output terminals | 24 (signal) and 23 (common) |
| Breaker-close relay terminals | 14 and 15 |
Input taps, governor output interface and dwell settings must match the installation. Listed agency approvals apply only to units bearing the corresponding marking.
Description
Woodward 9907-029 is an SPM-A synchronizer with voltage matching for generator paralleling. It compares generator and bus signals while adjusting the off-line set toward synchronism. The voltage-matching version also controls raise and lower commands to the voltage regulator. A breaker-close contact operates once the matching conditions persist for the selected dwell time. Adjustable dynamics allow the control to be matched to the prime mover. Correct speed-control interfacing and commissioning are essential before paralleling.
Speed, Phase & Voltage Matching
Match the off-line generator to the live bus before breaker closure.
Coordinate voltage-regulator raise/lower commands with the 1% matching setting.
Generator Paralleling
Synchronize an off-line generator with a live bus before closing its circuit breaker.
Use an appropriately engineered SPM-A installation to synchronize paralleled generator units to another bus.
Why Choose Us
Transaction Cases
A Germany customer urgently needed a replacement for a discontinued automation component. After reviewing the product label, technical parameters, and application details, our engineers recommended a compatible alternative and provided photos and test videos before shipment. The alternative performed well, enhancing the customer's confidence in our technical capabilities and leading to multiple repeat orders.
An Indian customer still had doubts after initial online communication with us, so they visited our company in person for a face-to-face meeting and product inspection. This visit increased the customer's trust and led to the successful placement of their first order. Over the next few years, we completed multiple orders and established a stable, long-term partnership.
A Malaysia customer needed a specific automation component and compared products and services from several suppliers online. After nearly three weeks of careful consideration, our sincere communication, professional service, and reliable product quality won the customer's trust. After receiving the product and using it for several weeks without any problems, the customer gave us positive feedback and subsequently placed multiple orders.
Major Business
Other Products
| ETRSEQ.0003 | DF143C | D4-Le MFD44J1 |
| DCN-FBP-D | KA/D 0403.1 | IS-UNITY-SNMP |
| Mini8 | JL086A JL086-61002 | SENSUS 04410580 |
| XBTOT2110 | FX-PCG2621-0 | PP056TB1-113 |
| HLPB04S | RS2B | VICTOR 0781-3619 |
| XFL522 | Nov-54 | PRO6LV PRO6/PRO10 |
| QSNE-4A-D | PWR-125W-AC 341-0502-01 | HS2032PCBCE |
| BMXAMI0810 | B110LP | EXP-2200 LBL-EXP2200 |
| DI32R-L | RS20-0800T1T1SDAPHH05.0.02 | DA2 RGBHV 60-488-01 |
| DDRC1210FR | ASI2314-B3 | PD-10N |
| NC-540-1-1-5 | AS-0054-001 | MODG2-12LC-SM-PT |
| QLCC01 | ADC8220/22 | K30/3 |
| AT-IR-CS-TX | ATA4S-00 | DIS61.CXANA |
You May Also Like
- Contact Us
-
Who are we?
ARWELL is a global supplier of PLC, DCS, VFD, HMI and other industrial automation components.We provide industrial automation parts and sourcing solutions for a wide range of applications.
ZXH18020776782
sales1@apterpower.com
Copyright © 2024 ARWELL LIMITED
Disclaimer: ARWELL sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
ARWELL is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.