Price：Request a Quote
Warranty：1 year
Condition：Brand new and factory sealed
Inquire Email：sales1@apterpower.com
Mobile/WhatsApp：+8618020776782
Click To Get Datasheet：
（click）
3300 XL NSv
3300 XL NSv Proximity Probe
Unarmored proximity sensing assembly.
1.0 m lead with a M10 × 1 mounting case.
TARGET GAP / PROBE / CABLE / NSv SENSOR
1.0 m
M10 × 1
190 mm
PPS sensing tip. Matched coaxial connection for the NSv system.
A direct line to your automation supplier.
Send your model number and quantity for product information and a quotation.
Sales manager
Jim PeiPhone/WhatsApp
+86 18020776782| Parameter | Specification |
|---|---|
| Total probe cable length | 1.0 m |
| Thread designation | M10 × 1 |
| Case length | 190 mm |
| Unthreaded length | 140 mm |
| Probe temperature range | −52 to +177 °C |
| Storage temperature range | −52 to +177 °C |
| Cable impedance | 75 Ω |
| Minimum cable bend radius | 25.4 mm |
| Recommended case torque | 11.3 N·m |
| Maximum case torque | 33.9 N·m |
| Recommended torque, first 3 threads | 7.5 N·m |
| Maximum torque, first 3 threads | 22.6 N·m |
| Connector maximum tightening torque | 0.56 N·m |
| Cable-to-case tensile strength | 220 N |
| Mated connector tensile strength | 220 N |
| Probe tip material | Polyphenylene sulfide (PPS) |
| Probe case material | AISI 304 stainless steel |
| Cable dielectric | FEP |
| Connector construction | Gold-plated brass |
| Connector type | Miniature ClickLoc coaxial |
| Connector protector | Not included |
| Cable armor | Not included |
| Approval order selection | Multiple approvals (05); installation conditions apply |
Torque limits depend on thread engagement. Sustained temperatures below −34 °C can shorten the pressure-seal life; the probe is not pressure tested. Verify the complete NSv system length and applicable approval before installation.
3300 XL NSV
Unarmored proximity sensing assembly.
Bently Nevada 330905-14-19-10-02-05 is a 3300 XL NSv proximity probe with a M10 × 1 threaded case and a 1.0 m integral cable. Its order configuration specifies a 190 mm case with 140 mm of unthreaded length. The standard unarmored cable provides the specified integral lead connection. The miniature ClickLoc connection is supplied without a connector protector. The probe works with matching NSv signal-conditioning components to measure the position of a conductive target. Correct system length, target clearance and installation approval must be checked before replacement.
01 / Sense target distance
The probe tip interacts with a conductive target so that compatible signal-conditioning electronics can determine target separation.
02 / Carry the high-frequency signal
The matched coaxial lead connects the probe to the NSv system without substituting a general-purpose cable.
03 / Match the selected mechanical format
The long metric case provides the selected threaded and unthreaded mounting sections without an armored lead.
Keep the electrical length matched
The one-metre probe requires the correct matching extension cable for the selected NSv system length.
The probe is one component of the transducer system; it does not contain the Proximitor sensor power and output circuitry.
Check the mounting configuration
The selected case uses M10 × 1 threads, a 190 mm case and 140 mm unthreaded length. Preserve these selections when replacing an installed probe.
Apply the approval selection
The 05 selection provides multiple approvals subject to the relevant region, marking and installation conditions.
Company was founded in Xiamen, Fujian, China, in 2005 with a team of only four people. At that time, we mainly served selected European and North American markets, supplying commonly requested industrial automation products from Siemens, Allen-Bradley and Bently Nevada. Although the business was still developing and we completed relatively few orders, this period helped us build essential product knowledge and international trade experience.
By 2017, our team had grown to approximately 30 people, and we had established a warehouse for in-stock automation components. Our business expanded across Europe, North America and Southeast Asia, while our product range grew from popular models to scarce and discontinued industrial automation parts. As our product knowledge and service experience increased, we completed nearly 20 orders per month on average.
Today, Company serves customers worldwide with a professional team of approximately 60 people. Our warehouse holds a broad selection of industrial automation components, including popular products, hard-to-find parts and discontinued models. We now complete more than 30 orders per month, with an average monthly transaction value of approximately USD 3 million. We have established long-term partnerships with nearly 30 customers from different countries and welcomed almost 40 international customers to visit our company.
Since our company was founded, we have served every customer with sincerity and professionalism. Our prices may not always be the lowest, but we earn long-term trust through quality products, dependable after-sales support, honest condition reporting, timely communication and responsible delivery. Our goal is to build lasting partnerships rather than pursue one-off transactions.
Support across the equipment lifecycle.
Most products are covered by a warranty of up to 12 months, subject to the applicable terms and conditions. If any product-related issue occurs during the warranty period, our team will assist you and provide an appropriate solution.
Relevant datasheets and technical literature can be provided with the goods, offering useful information for product identification, installation, operation, and maintenance.
We understand the importance of minimizing equipment downtime. Our team responds promptly to inquiries and provides professional assistance with product information, quotations, order status, shipping, and after-sales questions.
We serve customers worldwide and provide reliable assistance from inquiry to delivery and after-sales service, ensuring clear and timely communication throughout the process.
We continue to source discontinued, obsolete, and hard-to-find automation parts from various brands, helping customers maintain existing equipment and reduce downtime caused by spare parts shortages.
► DCS System: Distributed Control System (DCS) ◄
ABB | Invensys Foxboro | Invensys Triconex | Ovation | Woodword | HIMA | Yokogawa | Honeywell | Emerson
► PLC System: Programmable Logic Controller (PLC) ◄
Rockwell Allen-Bradley | Schneider Modicon | GE Fnauc | Siemens | Prosoft | Bachmann | Woodhead
► TSI System ◄
Bently Nevada | EPRO | ENTEK
| G2UM300VL20 | L01-2978-000 | 8BSA |
| 813S-V3-400V | T675A | HMIDT551 |
| DDM-163 | SPB-00154 | 7700FR-C |
| EM-MPO/350 | PCO3000AL0 | EDS4100 |
| MP204 | LSM4N | FS-B3510 |
| PCD7.D410VTCF | 370710B-200 | CAM301 |
| SS-18RS8 | Q4D-LUBCE011-00 | HS09572214 |
| PT220-256L-DNET | AMF9 | CCT15722 |
| CCHE-RM06-5C-P003RH | Y7512-5335 | ADM12-S4 |
| ECP-300 | RS-1140-0000 | UG-3-A4O |
| POL945.00/MCQ | ANMA213V2 | ADM12C-S2 |
| HFRC-01C | EPS5000-120 | PD-10N |
| BP3-1V11B5C111 | 500-003087-TK0 | P2RK-P |
ZXH18020776782
sales1@apterpower.com
Copyright © 2024 ARWELL LIMITED
Disclaimer: ARWELL sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
ARWELL is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
WhatsApp: +86 18020776782
Time: 24/7/365 Support
